CURING COMPOUNDS

CIS CHEM RCURWB 609

ECO-FRIENDLY, WAX-BASED, CLEAR CURING COMPOUND, SEALER AND DUSTPROOFER
PRODUCT CATEGORY: CURING COMPOUND

Product Discription

Versatile Dry Powdered Concrete Pumping Aid. Ready To Use Water Soluble Powder .It's A 100% Replacement For Cement Grout Slurries . Very Low Cost Material Compare To Cement Or Primer Slurries .Compatible With All Concrete Material & Not Having Calcium Chloride .Contains No Harmful Substance – Environmentally Safe

Uses

Provides a clear curing, sealing, dustproofing compound and acts as a pre-cure finishing aid, which can be used in a wide range of applications:

• High rise construction to eliminate water curing Floors, warehouses, slabs and columns Dust proofing concrete walls and floors Clear sealer for concrete Self-curing, primer system to subsequent coverings Pre-cure finishing aid; enables ease of finishing concrete flat works and pavement by manual steel or mechanical trowel

---

Specification

Where indicated in the contract documents, the water based curing copound with sealing and dustproofing properties will be CIS RCURWB 609 supplied by CIS

---

Characteristics / Advantages

Eco-friendly - water based, free from solvent, oils waxes, chlorinated or saponifiable materials Excellent evaporation controlling compound, resulting in moisture retention Excellent moisture retention for freshly placed concrete, resulting in minimising shrinkage cracks Suitability for foot traffic UV, chemical and abrasion resistant Versatile - can be applied equally well to freshly placed or existing concrete Cost effective - can be overcoated with waterbased and solvent based acrylic coatings, epoxy coatings, polyurethane coatings etc

---

Standards

compliance Complies to ASTM C1315 Type 1, class A

---

Properties

Solids content (ASTM D1644)   : 27%
Moisture retention   : 0.37kg/m² (ASTM C156)
Drying time   : 35 - 40 mins @ 20°C (ASTM C135, M 8.3) 10 - 15 mins @ 35°C
UV Resistance   : Resistant - no yellowing, (ASTM G53)
chalking - lighter than gardener
colour 3 Adhesion of tile cement
(ASTM C1315/ASTM D4541)   : 1.2 N/mm²

---

Application

CIS RCURWB 609 should be applied uniformly by brush, roller or spray, with no overlap of applications. Under standard site conditions, a single coat of CIS RCURWB 609 applied at a uniform rate of 7 to 10 m2 per litre. Extra porous substrates will necessitate application of CIS RCURWB 609 at a rate of 5 - 10 m² per litre. In case of sealing and dustproofing application, 2 coats at the above range must be applied. The second coat should be applied at a coverage of 10 - 15m² per litre. The applied film should not be trafficked until fully dry, and care should be taken to ensure that the film is not broken. Spray equipment Motorised or knapsack spray equipment, which produces a fine spray

---

Coverage

Coverage figures quoted for CIS RCURWB 609 are indicative; and based upon application to fresh or damp concrete at the appropriate time. Care should be taken to ensure that the concrete is indeed ready to accept the curing membrane CIS RCURWB 610: 5 to 10 m2 /litre

Packaging

50 litre,100 litre,200 litre

---