• BIS 9103:1999 And ISO Certified Company

  • CM/L:7800113509

REPAIR AND RESTORE

CIS LEAK PLUG SUPER

RAPID SETTING POWDER FOR WATER LEAKAGE & REPAIR
PRODUCT CATEGORY: REPAIR

Team Details

Product Discription

CIS LEAK PLUG SUPER is an instant leak plugging compound. It is ideal for instantaneous sealing of leaks and plugging wet cracks in concrete and masonry surfaces. It is specially formulated to stop the flow of running water.

Areas Of Application

Basements, pits, dams, cellars, tunnels (ducts), concrete pipe, water retaining structures and rcc water tanks

Precautions & Limitations

CIS LEAK PLUG SUPER will plug leakages only on cementitious substrates. Only used for plugging leakage instantly, till permanent repairs are carried out. Permanent repairs must be carried out using appropriate products of CIS INFRACHEM PVT LTD


Mixing

  • RCIS LEAK PLUG SUPER should be added to clean water by 1 kg per 0.20 liters of water. CIS LEAK PLUG SUPER Mix in a suitable mixing bucket by using a trowel or glove hand
  • CIS LEAK PLUG SUPER is a rapid setting cementitious product. Mix only a quantity which can be placed in setting time. After making them to feel warm, it can be filling. It can plug in the prepared pan. Press the immersing tightly for a moment and feel the material hardens

Application

Surface preparation Repair areas should be cut back to 15 mm. depths minimum. Feather edges must not be allowed. Surface should be clean without loose material dust; laitance and anything affect bonding between cementitious substrate and material


Application Applied

CIS LEAK PLUG SUPER in repair area and ensure product maximum contact to substrate before setting time. CIS LEAK PLUG SUPER should be used and held in place until the initial setting time


Technical Infromation

PROPERTIES RESULTS
Test Temp (OC) 30 C
Pot life of mixed material @30OC (minutes) 150 minutes
Specific gravity (g/cc) 2.01 to +/-0.01
Thickness of application (W.F.T), microns 70 - 75 per coat
Hard drying time (hrs.) 24 hrs
Coverage 6 m2 / ltr at DFT of 100 microns in 2 coats

Packaging

2KG


Self Life

12 MONTHS FROM MFD WHEN UNOPNED AND PROTECTED FROM SUNLIGHT


Health & Safety Precautions

Like for all chemical products, caution should always be exercised. Protective clothings such as gloves and goggles should be worn. Treat any contact to the skin or eyes with fresh water immediately. Should the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately.