WATERPROOFING CHEMICAL
CIS POWDER WATERPROOF 521
INTEGRAL POWDER WATERPROOFING COMPOUND FOR PLASTER & CONCRETE
PRODUCT CATEGORY: INTEGRAL
WATERPROOFING
Product Discription
- CIS POWDER WATERPROOF is composed of
waterproofing additives, dispersed in inert fine
filler. It is an integra
- Powder-waterproofing admixture used for
waterproofing of concrete and cement plasters,
because It makes
- Concrete cohesive, reduces porosity & improve
water tightness
- Standard compliances / Specification
- Meets the requirements of IS : 2645 – 2003
standard
Typical Application
- Basements
- Roof slabs and screeds,
- Flowing concreate
- Water retaining structures,
- External plastering,/li>
- Bathrooms
- Balconies
Features
- Corrosion - Chloride-free hence no chances of
corrosion of reinforcement bars
- Water seepage - As an effective pore filler, helps to
fill capillaries and pores to prevent water seepage
- Consistency - Makes the mix cohesive and denser, hence the concrete & plaster has
reduced permeability
- Economics – Most economical water proofing additive, reduces water absorption.
- Setting & strength - Does not affect the setting time and strength of the cured
concrete.
- Compatibility – Compatible with all types & grades of cements
Packaging
1 KG
Method Of Appplication
Hand Mixing
- Add CIS Powder Waterproof to the dry mix of cement sand and mix evenly with a spade,
until an even mix is
- Obtained
- Add the measured quantity of potable water as per decided W/C ratio and mix to a
homogeneous & uniform
- consistency concrete / mortars
- Place the mixed concrete / mortar into shuttering, provided
- Cure the concrete / mortar surface as per regular practices of water curing
MACHINE MIXING
- Charge the Cement & sand as per the mix design into concrete mixer & mix for one minute.
Add 1Kg of CIS
Powder Waterproof for every 50X2 kg bag of cement. & mix for one minute
- Add the measured quantity of potable water as per W/C ratio and mix for 2-3 minutes to a
lumps free
- Homogeneous concrete
- Place the mixed concrete / mortar into shuttering, provided
- Cure the concrete / mortar surface as per regular practices of water curing
Precautions & Limitions
- Do not add CIS Powder Waterproof directly to water
- Do not add CIS Powder Waterproof in wet concrete/ mortar.
Mix with dry mortar composition
Technical Information
| PROPERTIES |
SPECIFICATION |
RESULTS |
| Appearance |
|
Free Flowing Powder |
| Colour |
|
Off White |
| Bulk Density |
|
0.45 G/ML TO 0.60 G/ML |
| Compressive strength, N/MM2 |
IS : 2645-83 |
Matches to control mix |
| Water permeability |
IS : 2645-83 |
50% OF CANTROL MIX |
Dosage
1 Kg CIS Powder Waterproof for 50x2 kg bag of cement
Helth & Safety
- Use rubber hand gloves & safety goggles, while using CIS Powder Waterproof.
- In case of contact with skin, wash with plenty of water.
- Keep out of reach of children'
