WATERPROOFING CHEMICAL

CIS SUPERBINDER

TWO COMPONENT EPOXY BONDING AGENT
PRODUCT CATEGORY: SLAB JOINT EPOXY

Product Discription

CIS SUPER BINDER is a two part solvent free bonding agent composed of liquid epoxy resin and hardener. It is used for bonding of structural concrete new to old concrete and bonding agent for bricks and steel components because it gives excellent bonding properties to freshly mixed concrete/mortars, glazed bricks, tiles, etc

---

Areas Of Application

• CIS super binder for bonding of old to new concrete / mortar
• To extend or repair structural concrete
• CIS super binder of glazed brick, tiles, steel & structural members

• Application advantage - It can be applied over damp concrete & plaster surfaces and provides excellent water resistant coating with tough & hard film
• Microbial resistant - Possesses anti-fungal property and is resistant to micro-organisms
• Adhesion - Provides excellent adhesion to all cementitious substrates
• Chemical resistant - Excellent resistance to water, salt water, mild acids, alkalis & soap water
• Toxicity – It is Non-toxic.
• Eco-friendly - Non-hazardous and non-flammable
• Economical - Water dilutable with high coverage hence economical
• Health and sefty - Safe for drinking / Potable water contact

---

Features & Benefits

• Ease of application - Easily applicable by brush as a bonding agent for old to new concrete / mortar
• Adhesion - Excellent adhesion to almost all building materials
• Strength - Bond strength exceeds the tensile strength of concrete hence no failure of concrete due to high degree of movements
• Open time - Comfortable open time to complete the work easily
• Shrinkage - Very low shrinkage as compaired to polymer modified cementitious bonding agents- Water resistance - Excellent water resistance and sealing property prevents leakage
• Toxicity - Non toxic.
• Moisture tolerant - It is moisture tolerant hence provides strong bond of new concrete to fresh concrete
• Durability - Very high durable bond
• Chemical Resistance - Resistant to chemical attack.

---

Method Of Application

Surface Preparation

• The surface must be thoroughly cleaned and prepared. Remove all loose particles, dirt, dust, laitance, and mould release agents, curing compounds, oils, grease, floor hardeners and any waterproofing materials for best results.
• Remove laitance, dirt and dust by mechanical scarification such as wire brushing, scrapping, scabling or grit blasting.
• Clean the dust by pressurized air or by washing with water. Oil and grease should be removed by degreasing with solvents like turpentine or thinners. Visible signs of mould growth should be removed & treated with a fungicidal solutions New concrete must be cured completely

Maxing

• Remove laitance, dirt and dust by mechanical scarification such as wire brushing, scrapping, scabling or grit blasting.
• Clean the dust by pressurized air or by washing with water. Oil and grease should be removed by degreasing with solvents like turpentine or thinners. Visible signs of mould growth should be removed & treated with a fungicidal solutions New concrete must be cured completely

Application

• Mixed material should be brushed applied on the prepared surface
• Overlay of concrete / mortar has to be placed on CIS super binder when it is tacky
• In case CIS super binder has dried, apply a 2nd coat before placing the concrete / mortar

---

Precautions & Limitions

• CIS super binder should be applied on old concrete surface
• Before CIS super binder get tack free, apply new concrete or mortar
• If applied coating gets fully dry then apply 2nd coat over it

Mixing Ratio

100:90 (base:hardener)

Packaging

1.8 kg

---

Shelf Life & Storage

• Shelf life is 12 months from date of manufacturing in unopened containers
• Store at cool & dry place, away from sun heat .

---

Coverage

2 – 3 sq meter / kg depending on the substrate

---