TILE ADDITIVES AND ADHESIVES
CIS TILE JOINT 45
TWO COMPONENT EPOXY HIGH STRENGTH TILE ADHESIVE
PRODUCT CATEGORY: EPOXY TILE ADHESIVE
Product Discription
CIS TILE JOINT 45 is a two-component, fast setting
high strength construction epoxy adhesive used for,
spot bonding large format tile and stone on vertical
surfaces & for either interior or approved exterior
applications.
It bonds virtually anything to anything from tiny
electronic parts to large structural components. Being
faster setting (15-20 mins at 30°C) its handling time is
achieved much faster which is apporx.2hrs & hence is
ideal for those jobs which have to be finished in 2-3
Hrs.
This multipurpose two component system comprises
of Epoxy resin and hardener which are to be mixed
thoroughly in the recommended ratio to achieve
optimum results. This system does not contain volatile
matter, hence there is negligible shrinkage on curing.
CIS TILE JOINT 45 which is internally flexiblized,
provides strong joints with excellent low creep
properties hence,make it ideal for structural bonding
applications.
Application Area Of CIS Tile Joint 45
- Spot bonding marble
- Granite and large format ceramic tile on concrete
and overheads
- Interior or exterior applications.
- Adhesive for bonding masonry
- Precast concrete and stone panels
- Ideal for fireplace surrounds
- Elevators and stair risers
- Adhesive for bedding and fastening marble
- Granite and other stone slabs on walls and wainscoting.
Adhesive for fabricating granite, marble and other stone
Product Features
- Permanent bond
- VOC of Resin & Hardener – 0.1 g/L max
- Non-sag consistency · Shock and Vibration resistant
- Quickly and easily applicable
- Non-staining
Application Method
- All substrates must be clean and dry when application of CIS TILE JOINT 45 Adhesive is
made. Finished
marbles/ granite / decorative stones equipped with any type of resin, mesh, epoxy or
fiberglass backing must
be ground in those areas to receive CIS TILE JOINT 45.
- Clean and grind back of stone at areas to receive the CIS TILE JOINT 45 spots using a
mechanical wheel
grinder with a diamond wheel/blade. Remove dust with a stiff brush, wipe entire surface.
Using a damp
sponge (not wet), wipe the tile or stone to remove any particles or remaining dust to
ensure a clean direct
bond and that all ground material is removed. Wipe dry with a clean cloth, then apply
CIS TILE JOINT 45.
- Mix Part A(Resin) and Part B(Hardener) (1 : 0.5 by weight). Mix until uniform in color;
no swirls. Small
quantities can be mixed with a putty knife or margin trowel. Larger quantities can be
mixed with an electric
drill mixer (low speed).
- Apply dabs evenly distributed on back of the stone or tile; 5 dabs minimum, 1 in each
corner and 1 in center.
Cover at least 10% of the area of each piece. Finished dab thickness must be a minimum
of 1/8" (3mm).
- After installation of CIS TILE JOINT 45 onto the marbles/ granite / decorative stones,
install onto substrate
and adjust for plumb and level.
Advantages Of CIS Tile Joint 45
- CIS TILE JOINT 45 Adhesive offers major advantages over mechanical anchoring, concrete
and wire, and the
thin -set method of installation
- The first advantage is speed of installation, which increases productivity and lowers
labor costs. · CIS TILE
JOINT 45 Adhesive is much easier to work with when compared to traditional methods –
drilling, cutting or
setting of clamps into a stone is not required.
- CIS TILE JOINT 45 Adhesive allows for quick and easy plumb adjustment while the stone is
in place to
compensate for uneven walls and thickness variations in the stone
- CIS TILE JOINT 45 Adhesive is permanent – it will not fail or deteriorate over time,
thus providing a
dependable and beautiful installation for life
Packaging
1Kg
Shelf Life
12 months from date of manufacturing in factory sealed container.
